Dive Rite Transpack Harness
Inspired by a remote
dive exploration in Japan where divers had to hike their
heavy gear through dry portions of cave to get to the underwater sumps.
The
explorers also needed the versatility to switch their gear configuration from
backmount to sidemount to single tanks (flexibility that a traditional hard
backplate does not offer). Designed like a mountaineer’s backpack, the TransPac
disperses weight across the hips and back, minimizing shoulder strain.
Adjustable straps adapt to a wide variety of exposure suits and means easy
donning and doffing. A soft backplate accommodates sidemount diving, yet gives
appropriate support for single tanks, double tanks or rebreathers. Slots in the
backplate fit standard 36-inch cam straps (included) for single tank diving.
The modular design allows for customization using an assortment of
pockets and accessories, depending on the needs and desires of the individual
diver. The TransPac is lightweight and flattens easily into a suitcase for
travel. The TransPac is designed to be used with any wing in the Dive Rite line.
Dive Rite Rec Wing
Designed to be worn with double tanks or singles, the Rec Wing is our most
popular due to its versatility.
The Rec Wing employs a Gusset Control System
(GCS) cord woven through tabs on the front face of the wing. When tightened, the
cord limits lift capacity so the Rec Wing can be used with single backmount
tanks. When the GCS cord is loosened, the Rec Wing provides its full lift
capacity of 51 pounds/23 kg of lift and can accommodate two 95 ft3/15 L back
mounted cylinders. Loose or tight, the GCS cord helps the Rec Wing maintain a
small profile for divers traversing in tight passages and the cord compression
helps in dumping air. Tough, ballistic nylon outer bag protects the wing from
tears and abrasion. The 15-mil urethane bladder is abrasion resistant, chemical
resistant and resists the growth of microorganisms. Choice of 16-inch rapid
exhaust (pull dump), 16-inch or 12-inch elbow, or Ritesource integrated octo
corrugated hose along with either 15-inch, 22-inch or 27-inch low pressure inflation hose.
The Rec Wing is designed for use with the TransPac, TransPlate or any
webbing-style harness. Made in the U.S.A.
Dive Rite Crotch Strap
Preferred by most divers for its general comfort,
the
1-inch crotch strap is ideal for fastening a harness and backplate securely to a
diver's body. By using a crotch strap,
Dive Rite Classic Quick Dump Pockets T2109 (set of 2)
The original TransPac weight system that holds up to 32-pounds of weight,
sixteen-pounds in each of the two pockets. Insert pouches are loaded with weight
and drop down inside the pocket through the top zipper.
Quick release dump is
achieved by pulling the red tab handles and the insert pouches drop out of the
bottom, leaving the weight pocket intact on the diver's belt. Insert pouches may
be purchased separately if lost or if they are unable to be recovered. Weight is
kept securely in place via a heavy-duty Velcro flap. The Classic Weight Pocket
System was designed for use with the TransPac Harness where it is woven onto the
waist strap over the waist plate and held securely in place. The Classic Weight
Pocket System can also be easily worn with the TransPlate Harness.
Cart: 0 Items |
Account |
Wish List | Order
Status | Login |
Checkout
